Our Products

Miracle Nyvin Cables

01

Miracle NYVIN™ cables are single Core, Annealed Tinned Copper Conductor, Heat Resistance 1050C Poly Vinyl Chloride (HR-PVC)insulation cables with Fiber Glass, Nylon Braided Nylon Lacquering.

These Cables are traditionally used in Air Craft wiring. These cables are economical and efficient to use as UPS Battery Cable, UPS Wiring, Battery bank interconnections, Panel Board wirings, interconnection wires apart from vari-ous othersuitable applications.

These cables are suitable for use in continuous service. It has conductor temperature rating of 1050C.Cable ambient temperatures – 300C to 650C. Uninyvin has good moisture and abrasion resistance. Good resistance to fuels,oils and alkalis. Miracle NYVIN™ conforms standard specification as per BSG- 177.

IGI Uninyvin Cable

02
  • More Economical than Pvc Cable.
  • Much better chemical Resistance than Pvc cable
  • Temperature range from -35.c upto + 150.c
  • Higher current carrying capacity than Pvc cable.

Example:- While a pvc cable of 120mm 2 can carry 235Amps, a Nyvin cable of U-0 (Approximately 50mm 2) can carry 240 Amps. Thus for the same current requirements a smaller size of wire can be used. This results in a much lower copper consumption, this making Uninyvin cable economical.

Finolex Cable

03
  • Finolex Cables is the market leader in Electrical wires. With superior quality and customer validated trouble-free performance validation, Finolex’s Industrial Cables is the number one choice in the market since last 50 years.
  • Finolex offers electrical wires for every segment of the market. Each wire is manufactured using more than 99.97% pure electrolytic grade, bright annealed bare copper with more than 100% conductivity. The conductor, made of multiple strands of finely drawn copper wires, offers great flexibility making it ideal for conduit wiring. The wires are insulated with a flame retardant (FR) PVC compound, specially formulated and manufactured in-house, using special grade PVC resin. The wires are ISI marked and approved by FIA/TAC. 

MG Electrica Lugs

04
  • Material : Electrolytic Copper Tube having conductivity more than 97% IACS.
  • Finish : Tin plating to avoid oxidation & to achieve maximum corrosion protection.
  • Annealing : Crack free crimping
  • Cable lugs are the devices used for connecting cable and wire conductors in electrical installations and equipment. These are used when permanent, direct fastening methods are not feasible or necessary. In general, lugs are fixed to cables and wires by inserting the conductor/s into the barrel (tube) of the device and then barrel is either crimped, soldered or welded onto the conductor for secure mechanical and electrical joint. The connection end of the lug is then fastened to connection point by means of a bolt, screw, or spring clip. Numerous sizes, configurations and material types are available to suit particular applications.

UL

05
  • Available in 1 /2/3/4 Change Over contacts
  • Rated Contact Switching current up to 48A
  • Coil Voltage available
  • DC : 5/12/24/48/60/80/110/125/ 220 V AC : 6/12/24/42/48/60/80/110/115/120/127/220/230/240Versions with coil overvoltage suppression
  • Versions with Flag indicators & Manual relay Test Push Buttons with the possibility of latching the normally open contacts closed
  • Mounting on PCB; Plug-in Socket; 35 mm DIN Rail
  • Screw & Spring terminals of Plug-in Sockets
  • ROHS; CE; VDE;
Scroll to Top